United Brass  REDUCING/REGULATING VALVES

The Cash-Acme pressure reducing and regulating valve is a single-seated, spring-loaded, direct-acting diaphragm valve.  It automatically reduces a high pressure to a low delivery pressure, maintaining the lower pressure within reasonably close limits regardless of fluctuations in the high pressure side of the line.  This valve is specifically designed for today's higher operating pressures.  It has a new monel diaphragm for greater efficiency, reduced maintenance and increased service life.  The convenient "T" handle allows maximum ease in operating pressure adjustments.

United Reducing Valve

 SPECIFY PRESSURE RANGE:
0 - 45 PSI OR 20 - 150 PSI
(Air and Water Valve available 5 - 120 PSI only)
Ordinary Saturated Steam:
  Max. Inlet Pressure - 200 lbs. WSP
  Max. Reduced Pressure - 150 lbs. WSP (2" Size - 125 lbs)
Sizes: 1/4" to 2"
Bronze Piston and Cylinder
Tee Adjusting Handle
Monel Diaphragm - Steam and Oil
Neoprene Diaphragm - Air and Water
Body Material: Iron

1001 - Steam & Oil
1010 - Air & Water

United Regulating Valve

 This is a single-seated, spring loaded, direct-acting diaphragm valve.  It automatically reduces a high pressure to a low delivery pressure, maintaining the lower pressure within reasonably close limits regardless of fluctuations in the high pressure side of the line.  These valves are manufactured for air, water or oil installations and are available in either two port or three port models. 
Three port valve is fitted for gauge # 974B, a back-connected gage with 2-1/2" face 0 - 100 lbs. pressure.
Maximum inlet pressure: 300 PSI
Maximum temperature: 180°F
Sizes: 1/4" and 3/8"
Pressure range: 10 - 125 PSI

915-A31 - 2 Port
915-A31S - 3 Port

United Reducing Valve Kit

 REDUCING VALVE INSTALLATION KIT
For convenience, order the Reducing Valve Installation Kit # 1001K.  This kit contains all the necessary items for accurate measurement of steam pressure.  Included is a nipple and reducing tee (sized according to valve pipe size), a pigtail to protect the gauge from live steam, a shut off ball valve and a steam gauge (2-1/2" face calibrated from 0 - 160 PSI).
Kits are available from 1/4" to 2", please specify size reducing valve kit is to be used upon.

1001K

VALVATE ASSOCIATES
15925 Minnesota Ave., Paramount, CA  90723
(562) 633-4300 - (714) 761-3644
FAX: (562) 630-2345
sales@valvate.com

Home - Contact Us - ASCO Red Hat - ASCO Tri-Point - ASCO Pneumatic - ASCO General Controls
 Hays - Kunkle - Magnatrol  - Plast-O-Matic  - Dwyer - W.E.Anderson  - United Brass - Solenoid Valves
 2-Way Valves - 3-Way Valves - 4-Way Valves - Air-Operated Valves - Combustion Valves
Steam/Hot Water Valves - Vacuum Service Valves - Cryogenic Valves - Multipol Valves
Intrinsically Safe Valves - Direct-Mount Pilot Valves - Low Power Valves - Manual Reset Valves
Long Life/Rapid Cycling Valves - Harsh Environment 3-Way Valves - Timer Drain Valves
Proportional Valves - Valve Position Indicators - Nuclear Valves - Pressure/Temperature Switches
Filters, Regulators, Lubricators - Safety and Relief Valves - Control Valves - Pulse Meters
Multi-Jet Cold/Hot Water Meters - Turbine Meters - Insertion Meters - Check Valves - Steam Traps
Brass Ball Valves - SS Ball Valves  - Globe/Angle Body Valves - Needle Valves - Gate Valves
Brass Fittings - Reducing/Regulating Valves - Fire Hose Valves - Sight Flow Indicators
Strainers - Butterfly Valves - Flow Controls - Flow Switches - Gages - Flowmeters  - Manometers
Level Switches - Flow Switches - Pressure Transmitters - Proximity Sensors