UNITED GLOBE AND ANGLE VALVES

These valves are designed for general service where tight shut off and frequent use are desired. They are especially recommended for use with steam, air oil, water and gas service, where non-metallic discs are suited.

	125 lbs. WSP @ 350°F Max 200 lbs. WOG @ 180°F Max 100% Pressure Tested (soft disc) Screwed Ends Rising Stem Swivel Disc Holder Ventilated Aluminum Alloy Hand Wheel Available with Plastic Hand Wheel Thru 1" Body Material: Bronze Conforming to ASTM B584-C84400 125T equipped with Teflon disc for general service including steam
126S 126T		125S 125T

VALVATE ASSOCIATES
15925 Minnesota Ave., Paramount, CA 90723
(562) 633-4300 - (714) 761-3644
FAX: (562) 630-2345
sales@valvate.com

	200 lbs. WSP @ 406°F Max (81T), 300 lbs. WSP (381T) 400 lbs. WOG (81T), 600 lbs. WOG (381T) 100% Pressure Tested (soft disc) Slip-On Disc Holder Replaceable Non-Metallic Disc Screwed Ends Rising Stem Union Bonnet Ventilated Aluminum Alloy Hand Wheel Available with Plastic Hand Wheel Thru 1" Body Material: Bronze Conforming to ASTM B62 (81T), B61 (381T) Non-Asbestos Packing
81T 381T

	200 lbs. WOG @ 180°F Max 100% Pressure Tested Screwed Ends Rising Stem "O" Ring Stem Seal Swivel Disc Holder Replaceable Non-metallic Disc Ventilated Aluminum Alloy Hand Wheel Body Material: Bronze Conforming to ASTM B584-C84400
176PA 2"		175S

	INSPECTOR'S TEST & RELIEF VALVE 200 lbs. WOG @ 180°F Max 100% Pressure Tested (soft disc) Screwed Ends "O" Ring Stem Seal Non-Metallic Disc Union Bonnet Body Material: Bronze Conforming to ASTM B584-C84400 1" Size Only UL Listed
132 1"

	AIR CYLINDER OPERATED GLOBE & ANGLE VALVES 200 PSI Body Rating @ 180°F Max. 40 PSI Operating Pressure for Standard Configurations 80 PSI Air Pressure Required (NC & NO) Viton Disc (other options available) Stem "O" Ring Seals Viton Standard Body Material: Bronze Conforming to ASTM B584-C84400 Sizes 1", 1-1/2", 2"
35V 35VNC (normally closed) 35VNO (normally open)		36V 36VNC (normally closed) 36VNO (normally open)