FLOWMETERS

Series RM Rate-Master® Flowmeters - Molded of tough polycarbonate plastic.  Used to indicate or manually control air or gas flow from .1 - 1800 SCFH.  Water flows to 10 GPM.  These low cost flowmeters are ideal for general use.  The direct reading scales eliminate troublesome conversions.  All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin.  Critical internal diameter of the variable orifice tube is held within +/- 0.0004".  The result is accurate and repeatable readings.  Installation is simple and cleaning is easy.

Series MM Mini-Master® Flowmeters - They offer advanced features at low cost and are ideal for a wide range of OEM and user applications in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, cabinet purging, to name just a few.  The standard Model MMA flowmeter is suitable for both gas and liquid applications.  It can be configured by the user with the parts provided to have non-removable top or bottom front mounted metering valves or no valve at all.  Has high chemical resistance, low moisture absorption and is transparent to facilitate routine inspection.  The Mini-Master®A is practically unbreakable, mounts easily, and is easy to read.  It features a 2" scale which combined with precision molding, enables highly repeatable readings to be made to within +/- 4% accuracy.

Series VF Visi-Float® Flowmeters - Precision machined from solid acrylic.  Used to indicate or manually control air or gas flow from .1 SCFH to 100 SCFH; water from .6 GPH to 20 GPM.  These flowmeters are especially popular for medical and laboratory equipment applications.  Scales are easy to read.  Accuracy is +/- 5% of full scale for VFA models, +/- 3% for VFB, and +/- 2% for VFC.  Scales average 2" long on the VFA models, 4" long on the VFB, and 5" long on the VFC.  Durable and attractive construction makes them practically unbreakable.

Series VA Variable Area Glass Flowmeters - accurately measure flow rates of air, water and other commonly used gases.  Designed with an easy-to-read universal mm scale and supplied with correlation chart containing calibration data for air and water.  Correlation data for other gases and liquids are available.  65 mm and 150 mm, +/- 2% FS accuracy, interchangeable flowtubes.  Glass flowmeters are suitable for metering carrier gases, liquid and gas measurement in pilot plants, laboratories, process flow and level indicating.  Units are equipped with a standard 6 turn needle valve for flow rate control.

Series TVA All Teflon® Flowmeters - offer solutions for measuring flow rates of highly corrosive or ultra-pure liquids.  Flowmeters are designed with 0 - 10 scale graduations denoting a descrete flow rate.  75 mm and 125 mm, 10:1 turndown, +/- 5% FS accuracy.

Series DR Direct Reading Glass Flowmeters - accurately measure flow rates of air or water with the convenience of a direct reading scale.  Permanently fused ceramic scale has integral float guides for optimum float performance.  Reflective plastic background and 1.5X magnification lens reduces eye fatigue and allows for more accurate readings.  Glass flowmeters are suitable for metering gases or liquids for film processing, paper manufacturing, chemical processing, semiconductor industry, water and air pollution analysis equipment, metals processing, industrial fuel and energy conservation, cylinder gas metering, and general laboratory and industrial applications.

Series DR4 High Flow Glass Flowmeters - offer a simplified solution to the problem of fluid flow indication at higher capacity levels.  Flowmeters have a direct reading scale for air or water and are designed to withstand even the harshest industrial applications.  Permanently fused ceramic scale has integral float guides for optimum float performance.  Reflective plastic background and 1.5X magnification lens reduces eye fatigue and allows for more accurate readings.  Units include a safety blow-out back panel for additional protection.  127 mm scale, +/- 10% accuracy, interchangeable flowtubes.

Series SSM Stainless Steel Flowmeters - are ideal for dirty or opaque fluids, high temperature and high pressure service and harsh environments.  The direct reading scale provides +/- 2% accuracy up to 600°F and 1000 psi with a rangeability of 25:1.  Flowmeters can be quickly disassembled without removing the body from the pipeline for easy cleaning.

Series RMV Rate-Master® Dial-Type Flowmeters - are compact and easy to read.  Three ranges to 20 GPM water.  Measure higher water flow rates with +/- 2% of full scale accuracy at affordable prices.  Rugged forged brass housing is standard on all models for great compatibility and the strength to withstand system pressure to 1000 psig.  Unlike glass tube rotameters, these units won't shatter and they work fine with even dark and/or opaque liquids. 

Series RMV II Rate-Master® Dial-Type Flowmeter - Low cost and easy to read.  Three ranges to 10 GPM water.  They employ a target-type design combined with a damage resistant magnetic linkage to drive a pointer over a litho scale.  This unique construction fully isolates flowing media from gage front for leakproof operation at pressures to 3000 psig with +/- 5% of full scale accuracy. Solid machined brass meter body is ideally suited for water flows.  Body design fits standard 4 1/2" mounting hole layouts per ANSI B40.1.  Inlet and outlet threads are standard 3/4" female.

Series HF In-Line Flow Monitors - are low cost and durable, and have a patented design based on a floating sharp-edged orifice disk and variable area flow measurement to yield accuracy of +/- 2.5% over center one-third of scale.  This allows accurate performance with fluid viscosities up to 500 SSU.  HF Flow monitors can be used to set flow rates, fluid motor and cylinder speeds.  Check pump high pressure performance, pressure relief valve settings, fluid handling systems in agricultural, construction or industrial machinery, power tools and equipment.  Monitor air with aluminum models; petrochemical operations with brass or stainless steel models.

Series MF & MFC Mass Flowmeters and Controllers - measure, monitor and control gas mass flow rates reliably.  These units provide an accurate measurement of gas mass flow rate independent of changes in pressure or temperature.  Actual gas mass flow rate is continuously displayed on a LCD readout.  Integral display, adjustable zero and span.

VALVATE ASSOCIATES
15925 Minnesota Ave., Paramount, CA  90723
(562) 633-4300 - (714) 761-3644
FAX: (562) 630-2345
sales@valvate.com

Home - Contact Us - ASCO Red Hat - ASCO Tri-Point - ASCO Pneumatic - ASCO General Controls
 Hays - Kunkle - Magnatrol  - Plast-O-Matic  - Dwyer - W.E.Anderson  - United Brass - Solenoid Valves
 2-Way Valves - 3-Way Valves - 4-Way Valves - Air-Operated Valves - Combustion Valves
Steam/Hot Water Valves - Vacuum Service Valves - Cryogenic Valves - Multipol Valves
Intrinsically Safe Valves - Direct-Mount Pilot Valves - Low Power Valves - Manual Reset Valves
Long Life/Rapid Cycling Valves - Harsh Environment 3-Way Valves - Timer Drain Valves
Proportional Valves - Valve Position Indicators - Nuclear Valves - Pressure/Temperature Switches
Filters, Regulators, Lubricators - Safety and Relief Valves - Control Valves - Pulse Meters
Multi-Jet Cold/Hot Water Meters - Turbine Meters - Insertion Meters - Check Valves - Steam Traps
Brass Ball Valves - SS Ball Valves  - Globe/Angle Body Valves - Needle Valves - Gate Valves
Brass Fittings - Reducing/Regulating Valves - Fire Hose Valves - Sight Flow Indicators
Strainers - Butterfly Valves - Flow Controls - Flow Switches - Gages - Flowmeters  - Manometers
Level Switches - Flow Switches - Pressure Transmitters - Proximity Sensors