ASCO Low Power Solenoid Valves

Low Power Solenoid Valves
2-Way, 3-Way and 4-Way

ASCO Low Power Valves

Brass or Stainless Steel Bodies, 1/4" to 1" NPT.
Molded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil.
Designed for use in automation of plant control systems to provide PLC compatibility, reduced battery drain, reduced wire cost and reduced heat rise.
Wide selection of 2, 3 and 4-Way constructions.
Air or inert gas only.
ASCO's lower-cost alternative to instrinsically safe valves in critical applications not requiring a safety barrier.

Series 8551 Low Power Direct Mount Solenoid Valves

Pilot Operated, Aluminum or Stainless Steel Bodies, 1/4" NPT.
Low Power solenoids plus direct NAMUR pad mounting.
Unique technology combines hard T-seals and flexible o-rings to provide bubble-tight shutoff, resistance to dirt, and multimillion cycle life.
Single or Dual Solenoids.

Series HV264153 Low Power Manual Reset

Universal, Air Assisted Piloted, Brass Bodies, 3/8" NPT.
Designed to meet vibration and/or shock per ISA specification S71.03C2. High Shock construction.
Handles aggressive atmosphere per salt resistance testing.
Most hardware is stainless steel, and all aluminum components are hard anodized and Nituff coated for corrosion resistance.
Manual reset housing is sealed with closed-cell CR sponge rubber, and equipped with sintered bronze breather to prevent condensation.
Last chance filter installed in auxiliary air port of the pilot valve.

VALVATE ASSOCIATES
15925 Minnesota Ave., Paramount, CA 90723
(562) 633-4300 - (714) 761-3644
FAX: (562) 630-2345
sales@valvate.com